Do you know all the precautions about fluency?

Fluent bar, also known as sliding shelf, the roller aluminum alloy, sheet metal and other smooth bar, the use of shelf weight. Using the weight of the shelf, you can buy goods from one channel, take goods from another channel, realize first-in-first-out, convenient storage, a replenishment can take multiple goods, its storage efficiency is high, suitable for short-term storage and sorting of a large number of goods. It can be equipped with electronic tags for easy management of goods. Commonly used sliding containers include turnover boxes, parts boxes, cardboard boxes, etc., suitable for large cargo and short-term storage and sorting, but also suitable for short-term storage and sorting of large items. They are widely used in distribution centers, assembly workshops and warehouses with high delivery frequency.

The overall structure of the fluent strip: some brackets are made of sheet metal or aluminum alloy, and the roller is usually nylon. The roller is made of high quality thermoplastic, with low friction coefficient, excellent impact resistance, robustness and brittleness. As far as chemical properties are concerned, they have good acid and alkaline resistance and do not absorb moisture. The smooth U-shaped groove is made of steel plate with smooth edges and has a bearing capacity of 6kg/ shaft. Fluent bar can work at -40 degrees. Its front and rear gears and side plates are made of curved steel plates. The front and rear gears ensure that the goods are prevented from pulling off the shelves under gravity, and the side panels allow the goods to slide freely along the smooth strip.

What should I pay attention to when using Fluency bar? And sheet metal fluent bar manufacturers have a look.

In general, when we don't use old drawers for a long time, not only is it difficult to open, but it also makes a harsh noise. Even if we pull it over, drawers will fall down and items will be scattered all over the floor. This unpleasant experience can be found everywhere. Therefore, when buying furniture with drawers, don't underestimate the importance of fluent strips. Avoid these awkward situations by choosing a good fluency bar, which has smooth hydraulics, quiet tracks, and automatically closes drawers with one click. It is very convenient to use and can save a lot of unnecessary trouble. It is primarily used to transport and support products in storage systems. It can be used as a rolling guide rail, guardrail and guide rail, good rolling performance, low cost. The roller is made of high quality thermoplastic, which has the advantages of low friction coefficient, impact resistance, long service life, acid resistance and moisture resistance.

Fluent bar structural characteristics: fluent bar is directly connected to the front and back beam and the middle support beam, beam directly hanging on the column. The installation slope depends on the size and weight of the container and the depth of the smooth support, usually 5% to 9%. Its carrying capacity is 6kg/ piece. When the load is heavy, 3-4 smooth rollers can be installed on a raceway, usually with a support beam every 0.6 m in the direction of depth. In order to increase the stiffness of the smooth slide rod, when the groove is long, it can be separated by a partition board. The receiving end of the cargo shall be equipped with brake pads to slow the cargo and reduce impact.

Above is the aluminum alloy fluent bar manufacturers to answer this question, if you have other questions and needs, welcome to contact us!