Share the precautions when using the metal fluent bar

As a common building material, metal fluent strip has the advantages of corrosion resistance, wear resistance and high strength, so it is very popular in the actual engineering construction process. However, there are also some precautions to be paid attention to in the use of metal fluent strips, which will be introduced and analyzed in detail by the manufacturers of fluent strips in this paper.

1. check before installation

Before installing the metal fluent strips, they must be inspected. First of all, we need to check whether the length, width, thickness and other dimensions of the fluent strip meet the requirements, and then we need to check whether the surface has cracks, deformation, oxidation, cutting mouth and other defects. If there are serious defects on the surface of fluent strips, they need to be replaced or repaired in time. In addition, it is also necessary to check whether the flatness of the fluency strip edge meets the requirements. Only through the quality inspection, to ensure the use of metal fluent strip quality.

2. Precautions for installation

In the installation process of metal fluent strip, the following points need to be paid attention to:

（1）Special tools should be used for installation to avoid damage to the product surface and ensure installation quality;

（2）When installing, attention should be paid to the gap between the fluent strip and the cover. Too large or too small a gap will affect the beauty and performance;

（3）Ensure that the spacing between the fluent bars is consistent when installing, and the visual effect will be better;

（4）Before installation, the structural type, material characteristics and slope of the wall or ground should be found out to ensure the firmness and stability of the adhesive;

（5）In the process of installation, pay attention to keep the fluent strip clean, to avoid dirt adhesion to the surface damage.

3. Precautions for use

When using metal fluent strips, the following points need to be noted:

（1）Long time wet environment must be avoided to prevent rust on the surface;

（2） Metal fluent strips should not be hit by sharp objects to avoid scratches or deformation;

（3）metal fluent strip should not be exposed to strong acid, strong alkali or strong corrosive gases;

（4）metal fluent strip should not be exposed to strong light for a long time, so as to avoid surface damage;

（5）in the maintenance of metal fluent strip, should use neutral detergent, avoid the use of too strong detergent has affected the surface quality;

（6） Keep the surface of the metal smooth strip dry and clean to avoid various corrosion phenomena.

4. maintenance matters needing attention

In the maintenance and maintenance of metal fluent strips, the following points need to be paid attention to:

（1）Clean the metal fluent strip regularly to maintain the brightness and beauty of its surface;

（2） Keep the surface of the metal smooth strip dry, avoid all kinds of oxidation, corrosion phenomenon;

（3） If obvious scratches, pits and oxidation are found on the surface of the metal fluent strip, maintenance or replacement should be carried out in time;

（4）When repairing or replacing the metal fluent strip, it should be operated in accordance with the requirements of the product manufacturer to ensure the construction quality and safety;

（5） In the use of metal fluent strip, should be based on its type and use, reasonable choice of different kinds of cleaning agents for cleaning and maintenance, to avoid adverse effects on the surface.

The above is the sheet metal fluent bar manufacturer's answer to this question. If you have other questions and needs, please contact us!