Roller line

Wholesale manufacturers of roller line introduce the roller conveyor products of roller line to you. The pictures of the products are as follows:

The roller line cannot be removed properly

Cause of failure: There are defects on the left and right of the disassembly of the roll line, which leads to the normal disassembly of the roll line.

Solution: Check the disassembly mechanism of the roll line, find out the problem, and solve the problem one by one.

There is a problem with the safety door of the roller line

Cause of failure: The safety door of the roller table has a problem, which may be switch failure or mechanical damage.

Solution: Check the safety door of the roller line to find out the problem. If the switch is faulty, it needs to be replaced. If the machine is damaged, repair or replace the corresponding parts.

The power cord of the roller line is disconnected

Cause of failure: The power line of the roller table has problems, which may be caused by open circuit, short circuit and other problems.

Solution: Find the location of the broken power cable and repair it.

In general, all kinds of fault handling of the roller line need to step by step, find out the problem, and deal with the problem. In the process of assembly and commissioning of the roller line, it is necessary to comply with the corresponding requirements and standards to ensure the normal and efficient operation of the roller line. At the same time, it is also necessary to overhaul and maintain the roller line regularly to improve the efficiency and service life of the roller line. If you want to know more about the price of roller line, please contact us!